Leave your email address to be the first to know about new BrewJacket products or sales.
Just set the temp. Achieve up to 35º above or below ambient and hold that temp to 0.3º F with Immersion Pro's patented solid state heat exchange system. No pumps, no glycol, no coolers of ice water.
The thick jacket gives your fermenter an insulation factor comparable to a refrigerator. It also blocks light.
Immersion Pro's patented solid state heat exchange system creates a heat vacuum using 90w of electricity, allowing it to remove heat from your fermenter. The heat flow is reversible, allowing Immersion Pro to also add heat to your fermenter. The controller decides when to activate the heat exchanger based on your set temperature and the temperature it reads inside your fermenter.
Immersion Pro's rod is removable for easy cleaning and storage.
Immersion Pro is modular. The control board is upgradable and the base is easily swapped out in the unlikely event it needs service. This allows you to take advantage of new technologies when they come available.
• Head Unit: 5.5″ x 5.5″ x 5.5″
• Rod: 1.5″ diameter x 18″ long
• Jacket: 15″ internal diameter x 22″ high
• Head Unit: 2.5lbs
• Rod: 3.2lbs
• Jacket: 4.5lbs
• Idle: 8w
• Cooling: 95w
• 0-10º +/- Ambient1º/hr
• 10-20º +/- Ambient0.5º/hr
• 20-35º +/-Ambient0.25º/hr
*Performance varies with fermenter
One of the greatest things a brewer can do to improve his beer is manage the fermentation temperature. This is far more important than using fancy fermentors or even all-grain brewing.
I thought it would take me years before I was able to afford the equipment for lagering, BrewJacket made this a reality within a few months... The support is always responsive, and always willing to go above and beyond to make sure you're happy. I have three BrewJackets now- and they're great!
Brewjacket has been revolutionary to my brewing. With about 100 batches in my history, this device has, for the first time, enabled me to prevent fermentation temperatures from hitting the zones that produce off flavors in the warmer months. Secondly, its enabled me to keep the fermenters in one location in the garage - outside of our living room and light protected so the sunlight problems are not an issue. Lastly, as a result of this, I am able to pick any style of beer, at any time of the year to brew. I've greatly enjoyed the personal interaction with the team at BrewJacket and their rapid responses to fix my concerns without hesitation. I greatly look forward to many new brews with precision control.
|Carboy/Bucket Jacket||3-Legged Conical Jacket||4-Legged Conical Jacket|
|PET Carboy (3-6 Gallon)||✔|
|Brew Buckets 5G, 6G, 6.5G, 30L||✔|
|Fermonster PET Carboy 6G, 7G||✔|
|Speidel 20L, 30L||✔|
|SS BrewTech Brew Buckets 3.5G, 7G||✔|
|Glass Big Mouth Bubblers 5G, 6.5G||✔|
|Plastic Big Mouth Bubblers 5G, 6.5G||✔|
|Chapman UniVessel 7G||✔|
|SS BrewTech Chronical||✔|
|Blichmann Fermenator 7G||✔|
|MoreBeer! Conical Fermenter 7.5G||✔|
|Fast Ferment Conical 7.9G||✔|
|Incompatible: Glass Carboy|